Firewarm Multifuel Insert StoveFirewarm Multifuel Insert Stove
Buy Online at our new site -

  • Secondary burn technology for increased efficiency
  • Inner cast iron combustion chamber
  • Primary and secondary air regulators
  • Full cast iron construction
  • Airwash technology
  • Large ceramic glass door
  • Ash pan with tool

Heat Loss

When the fire is unlit, the Firewarm Insert Stove will prevent any room heat escaping up the chimney. This will improve the BER rating for your home.

Protect the Environment

Depending on the chimney, open fires can be as low as 20% efficient; the majority of the heat produced goes straight up the chimney and out of the house. Stoves should deliver a minimum 65% efficiency, while some stoves can deliver up to 80% efficiency.

This means that a quality stove will produce more heat, from less fuel, for longer, than an open fire.

Naturally, this means that burning a stove is kinder to the environment also, burning less fuel and delivering fewer toxins into the atmosphere.

Firewarm Insert stove Sizes

Easy Installation using our Unique Patented Fixing Mechanism

The Firewarm Insert Stove can be simply installed into a standard solid fuel fireplace opening. Simply remove the fret and grate; slide the appliance into place and tighten the locking system to seal the stove to the fascia of the fireplace back panel. Removing the fireclay fireback is not necessary.

This stove must not be installed into a chimney that serves any other heating appliance.

Firewarm Insert Stove Fitting Instructions

Get in Touch

  • Phone:
    01384 880 007
  • Email:
  • Address:
    The Hot Spot (UK) Ltd
    Staffs. ST14 8GA