Pop3 Workshop & Greenhouse Stove

The Pop3 is the ONLY Multifuel Workshop Stove in our Workshop Heater Range. Buy here

The 23Kg stove offers a heat output of up to 4Kw heating up to 3,200 cubic feet or 90 cubic metres of workspace.

The POPULAR stove has a rear flue outlet and will require a 90-degree bend. The Flue is 100mm in diameter and is orderable only in vitreous 1mtr lengths. Bends of 45^o and 90^o.

Your roof may be made of combustible material, so we offer a Roof Tile with the Boot already built in. This tile provides an area of 1600mm² allowing you to pare back the roof material to provide a safe gap from the flue.

For roofs made from non-combustible material and these may be corrugated, we recommend the Boot with the Fixing Kit. The Fixing Kit comes with 78gm dispenser of silicone sealant, 1 trimming knife, 1 drill bit, 12 washered fasteners, 12 plastic caps, lubricant, fitting instruction leaflet.

The top may be finished with either a Rain Top or a Swivel Cowl in galvanised steel.
A minumum of 3 metres of flue is required for a good draw.

Pop3 Multifuel Workshop Stove Specification Diameter x Height Weight Heat Production Cubic Feet Heated Cubic Metres Heated 300 x 500 14KG 6kW 2,100 60

Available Pop3 Flue items: - 100mm diameter Flue Items Galvanised Steel Vitreous Enamel Stainless Steel 1mtr lengths De-WS104 45o Bend De-WS105 90o Bend De-WS106 Rain Top (95mm) Swivel Cowl (95mm)

Roof Flashings - Where pitch of roof is 0o -  40o Roof Flashings Tiled or Combustible Roofs Corrugated or non-Combustible Roofs Aluminium Tile + Boot Part No. De-SDA101B Boot Part Nos. De-DF204R Fixing Kit Part No. De - FX01

Where pitch of roof is greater than 40o Roof Flashings Tiled or Combustible Roofs Corrugated or non-Combustible Roofs Aluminium Tile + Boot Part Nos. De-SDA101B Boot Part No. De-DF205R Fixing Kit Part No. De - FX01